"Error 734: The PPP Link Control Protocol Was Terminated" Error Message Occurs If You Try to Establish a Dial-Up Connection
System TipThis article applies to a different version of Windows than the one you are using. Content in this article may not be relevant to you.Visit the Windows XP Solution Center
- Multi-link negotiation is turned on for the single-link
- The dial-up connection security configuration is incorrectly configured to use the Require secured password setting.
- Click Start, point to Settings, and then click Network
and Dial-up Connections.
NOTE: For Windows Server 2003, click Start, point to Control Panel, and then point to Network Connections.
- Right-click the appropriate dial-up networking connection, and then click Properties.
- Click the Networking tab, and then click Settings.
- Click to clear the Negotiate multi-link for single link connections check box (if it is selected).
- Click OK, and then click OK.
- Double-click the connection, and then click Dial.
- If this procedure resolves the issue and you can establish a dial-up connection, you do not have to follow the remaining steps in this article.
- If this does not resolve the issue and you cannot establish a dial-up connection, go to step 7 to continue to troubleshoot this issue.
Back to the top
- Microsoft Windows 2000 Professional Edition
- Microsoft Windows Server 2003, Standard Edition (32-bit x86)
- Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
- Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
- Microsoft Windows Small Business Server 2003 Premium Edition
- Microsoft Windows Small Business Server 2003 Standard Edition